DG405BDY Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operation at a temperature around -40°C~85°C TA. A total of 16 terminations have been recorded. High-quality output is provided by the electronic component's 2 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 16 pins. Unlike digital switches, these are based on SPST - NO switching circuits. The internal resistance of this digital multiplexer is 45Ohm. Please refer to the datasheets for 16 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 36V voltage to the switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended to use 13V as the lowest voltage for the electrical part. If you put voltage higher than 500μA on the digital multiplexer, damage may occur. For this switch, a dual supply voltage is feasible, but it must not exceed 22VWith dual power supplies, you should attach at least 7V. It is integrated with DPST analog ICs. The electronic component can function from 15V. Multiplexer ics with 4 outputs are available.

DG405BDY Features

2 Channels
Switch Circuit: SPST - NO

DG405BDY Applications

There are a lot of Vishay Siliconix DG405BDY Analog Switches & Multiplexers ICs applications.

• Fault Tolerant Systems
• Access Concentrators
• Audio/video switches
• Audio signal routing
• Data switching
• Automatic test equipment
• Cable PC
• Frame Relay Equipment
• Relay replacements
• Cellular phones