DG409DY-E3 Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Operating temperature extended to -40°C~85°C TA. Total terminations are 16. A 4 channel electronic part produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. 16 pins are injected to the electronic part body. These analog multiplexers are built based on SP4T switching circuits. The circuits in this analogue multiplexer number 2. Try searching for the analog switch ic with DG409 if you are looking for variants. A 40Ohm internal resistance characterizes this multiplexer. You can find the functions of the 16 pins in the datasheets. It is generally not recommended to supply a voltage higher than 36V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 5V. It would be sufficient to run this analogue multiplexer with 1μA current. Put voltage above 500μA on the multiplexer to cause damage. There is no problem with using dual supply voltage, but it should not exceed 20V. If you are using dual power supplies, you should attach at least 5V. The electrical component supports 8 inputs. There is 100Ohm Drain to Source resistance on this electronic part.

DG409DY-E3 Features

4 Channels
Switch Circuit: SP4T
1μA Supply Current
Drain-to-Source resistance: 100Ohm

DG409DY-E3 Applications

There are a lot of Vishay Siliconix DG409DY-E3 Analog Switches & Multiplexers ICs applications.

• Battery Powered Systems
• Cross Connects
• USB 1.1 signal switching circuits
• Cellular phones
• PCMCIA cards
• DSUs
• Multi-Line E1 Interface Cards
• T1/E1 Terminals
• Communication systems
• High speed data transmission line cards