As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 16. The electronic part provides high-quality output because it has 4 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. Multiplexers built on a SP4T switching circuit are built. The circuits in this analogue multiplexer number 2. DG409 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 17Ohm. For details about the functions of 16 pins, please refer to the datasheets. In normalcircumstances, users should not exceed 12V volts for the multiplexer. An effective Dual, Single supply digital multiplexer. There should be 2.7V voltage fed to the electrical part below 2.7V. For this digital switch to work, 700μA current would suffice. A digital multiplexer may suffer damage if voltage is applied above 500μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. The voltage should be at least 3V if you are using dual power supplies. Operating 8 inputs is required. This electrical component also includes additional features such as VIDEO APPLICATION. Drain to Source resistance is 30Ohm.
DG409LDQ-T1-E3 Features
4 Channels Switch Circuit: SP4T 700μA Supply Current Additional Features: VIDEO APPLICATION Drain-to-Source resistance: 30Ohm
DG409LDQ-T1-E3 Applications
There are a lot of Vishay Siliconix DG409LDQ-T1-E3 Analog Switches & Multiplexers ICs applications.