DG409LDY Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tube. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Operating temperature around -40°C~85°C TA extended. 16 terminations have been made so far. The electronic part provides high-quality output because it has 4 channels. It is injected into the electrical part body with 16 pins. On the other hand, analog switches can be constructed using SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. An switch multiplexer with 29Ohm internal resistance has a value of 29Ohm. Please refer to the datasheets for 16 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 12V. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 2.7V. Putting voltage greater than 500μA on the multiplexer may cause damage. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. The voltage should be at least 3V if you are using dual power supplies. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER. In order to operate the 8 inputs, there are several steps to follow. It has a Drain to Source resistance of 30Ohm ohms.

DG409LDY Features

4 Channels
Switch Circuit: SP4T
Drain-to-Source resistance: 30Ohm

DG409LDY Applications

There are a lot of Vishay Siliconix DG409LDY Analog Switches & Multiplexers ICs applications.

• Ultrasound
• CSU
• High-Voltage
• DSLAMs
• New designs requiring multiplexer functions
• Battery Powered Systems
• Sample-and-hold systems
• Wireless Local Loop
• Mechanical reed relay replacement
• Microprocessor controlled systems