Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DG411DY-T1-E3

DG411DY-T1-E3

DG411DY-T1-E3

Vishay Siliconix

175ns, 145ns SPST - NC 35Ohm Analog Switches BREAK-BEFORE-MAKE DG411 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)

SOT-23

DG411DY-T1-E3 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 13 Weeks
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 665.986997mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2016
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 80Ohm
Subcategory Multiplexer or Switches
Max Power Dissipation 600mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 1.27mm
[email protected] Reflow Temperature-Max (s) 30
Base Part Number DG411
Pin Count 16
Operating Supply Voltage 15V
Polarity Non-Inverting
Number of Channels 1
Max Supply Voltage 36V
Min Supply Voltage 13V
Operating Supply Current 1μA
Nominal Supply Current 100pA
Power Dissipation 600mW
Max Supply Current 1μA
Throw Configuration SPST
Turn On Delay Time 175 ns
Number of Inputs 4
Voltage - Supply, Single/Dual (±) 5V~44V ±5V~20V
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 145 ns
Max Dual Supply Voltage 22V
On-State Resistance (Max) 35Ohm
Min Dual Supply Voltage 7V
High Level Output Current 30mA
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 68 dB
Current - Leakage (IS(off)) (Max) 250pA
Channel Capacitance (CS(off), CD(off)) 9pF 9pF
Switch Circuit SPST - NC
Switch Time (Ton, Toff) (Max) 175ns, 145ns
Charge Injection 5pC
Crosstalk -85dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 220ns
Drain to Source Resistance 45Ohm
Normal Position NC
Height 1.55mm
Length 10mm
Width 4mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $2.51000 $2.51
500 $2.4849 $1242.45
1000 $2.4598 $2459.8
1500 $2.4347 $3652.05
2000 $2.4096 $4819.2
2500 $2.3845 $5961.25
DG411DY-T1-E3 Product Details

DG411DY-T1-E3 Overview


The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 1:1. Around -40°C~85°C TA is the extended operating temperature. In total, there are 16 terminations. By its 1 channels, the electronic component provides high-quality output. A 15V voltage supply should turn on and run the electronic component. There is an electrical component included in the 16 series. SPST - NC switching circuits are used in these analog switch ics. Try searching with DG411 to find analog multiplexer variants. As far as internal resistance is concerned, it has 80Ohm. For details about the functions of 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users should never supply a voltage higher than 36V to a switch device. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 13V. This digital switch can be operated with a current of 1μA. Putting voltage greater than 1μA on the multiplexer may cause damage. There is no problem with using dual supply voltage, but it should not exceed 22V. If you are using dual power supplies, you should attach at least 7V. It can operate from 15V operating voltages. Operating 4 inputs is required. Resistivity from Drain to Source is 45Ohm for this electronic part.

DG411DY-T1-E3 Features


1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
Drain-to-Source resistance: 45Ohm

DG411DY-T1-E3 Applications


There are a lot of Vishay Siliconix DG411DY-T1-E3 Analog Switches & Multiplexers ICs applications.

  • Mechanical reed relay replacement
  • Avionics
  • ISDN NT1/TA
  • Frame Relay Equipment
  • Access Concentrators
  • PCMCIA cards
  • Relay Replacement
  • Medical systems
  • Audio and video switching
  • SDH/SONET multiplexers

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News