DG411LDY Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 16 terminations. There are 16 pins injected into the electronic part body. The analog switch ics are built using SPST - NC switching circuits. It has an internal resistance of 17Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 2.7V is the lowest voltage that should be fed to the electronic electronic part. A digital multiplexer may suffer damage if voltage is applied above 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. In the case of dual power supplies, you should connect at least 3V. There are SEPARATE OUTPUT outputs on this analog switch ic. There are 4 inputs to be operated.

DG411LDY Features

Switch Circuit: SPST - NC
-3db Bandwidth: 280MHz

DG411LDY Applications

There are a lot of Vishay Siliconix
DG411LDY Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems