DG412DJ-E3 Overview

The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. This analog switch is mounted in Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. Into the electrical component body are injected 16 pins. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching with DG412 to find analog multiplexer variants. In this multiplexer, the internal resistance is 35Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage higher than 36V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 13V. The switch device would be able to operate with 1μA current. When the digital multiplexer is charged above 1μA, damage can occur. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. It is recommended that you attach at least 7V to your dual power supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. 15V operating voltages are supported by the electronic component. There are 4 inputs to be operated. A Drain to Source resistance of 35Ohm is shown for this electronic part.

DG412DJ-E3 Features

1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
Drain-to-Source resistance: 35Ohm

DG412DJ-E3 Applications

There are a lot of Vishay Siliconix DG412DJ-E3 Analog Switches & Multiplexers ICs applications.

• Industrial and process control systems
• Cellular phones
• Automatic test equipment
• Digital cross connects (DSX-1)
• Voice over IP/DSL – Integrated Access Devices, Smart
• Video switching
• Remote wireless modules
• Avionics and Military Systems
• SDH/SONET multiplexers
• PDH Multiplexers