105ns, 80ns SPST - NO 35Ohm Analog Switches BREAK-BEFORE-MAKE DG412 16 Pins 250pA 15V 16-DIP (0.300, 7.62mm)
SOT-23
DG412HSDJ-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
12 Weeks
Mount
Through Hole
Mounting Type
Through Hole
Package / Case
16-DIP (0.300, 7.62mm)
Number of Pins
16
Weight
1.627801g
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Published
2016
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
80Ohm
Terminal Finish
MATTE TIN
Subcategory
Multiplexer or Switches
Max Power Dissipation
470mW
Technology
CMOS
Number of Functions
4
Supply Voltage
15V
Base Part Number
DG412
Output
SEPARATE OUTPUT
Pin Count
16
Number of Channels
1
Number of Circuits
4
Max Supply Voltage
44V
Min Supply Voltage
13V
Operating Supply Current
1μA
Max Supply Current
1μA
Throw Configuration
SPST
Turn On Delay Time
105 ns
Voltage - Supply, Single/Dual (±)
12V ±5V~20V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
105 ns
Max Dual Supply Voltage
22V
On-State Resistance (Max)
35Ohm
Min Dual Supply Voltage
7V
Dual Supply Voltage
15V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
91 dB
Current - Leakage (IS(off)) (Max)
250pA
Channel Capacitance (CS(off), CD(off))
12pF 12pF
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
105ns, 80ns
Charge Injection
22pC
Crosstalk
-88dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Switch-off Time-Max
90ns
Normal Position
NO
Height
3.81mm
Length
21.33mm
Width
7.11mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
500
$2.90500
$1452.5
DG412HSDJ-E3 Product Details
DG412HSDJ-E3 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Through Hole is this multiplexer. Multiplexer and demultiplexer circuits have a number 1:1. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. As part of its design, the 16 series is equipped with this electronic component. Based on SPST - NO switching circuits, these analog multiplexers work. There are 4 circuits in this multiplexer. Try searching for DG412 variants of the analog switch ic. As far as internal resistance is concerned, it has 80Ohm. Datasheets for functions of 16 pins are available. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 44V. Dual, Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 13V. For this digital switch to work, 1μA current would suffice. The analogue multiplexer may be damaged if voltage is greater than 1μA. Despite this switch device's dual supply capability, its voltage should not exceed 22V. For dual power supplies, a voltage of at least 7V should be attached. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.
DG412HSDJ-E3 Features
1 Channels Switch Circuit: SPST - NO 1μA Supply Current
DG412HSDJ-E3 Applications
There are a lot of Vishay Siliconix DG412HSDJ-E3 Analog Switches & Multiplexers ICs applications.
RGB switches
MP3 players
Industrial
Medical Instrumentation
Avionics
Industrial and process control systems
Existing multiplexer applications (both fault-protected and nonfault-protected)