DG412LDQ-E3 Overview

Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Increasing operating temperature to around -40°C~85°C TA. The total number of terminations is 16. High-quality output is provided by the electronic component's 1 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. 16 pins are injected to the electronic part body. The analog switch ics are built using SPST - NO switching circuits. Circuits number 4 make up this analogue multiplexer. Search with DG412 if you are looking for analog multiplexer variants. Analog switches have 50Ohm internal resistance. Please refer to the datasheets for 16 pins functions. This switch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 12V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. A low voltage of 2.7V should be applied to the electronic component. In order to operate this switch device, it would need a current of 1μA. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. In the case of dual power supplies, you should connect at least 3V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.

DG412LDQ-E3 Features

1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 280MHz

DG412LDQ-E3 Applications

There are a lot of Vishay Siliconix DG412LDQ-E3 Analog Switches & Multiplexers ICs applications.

• Existing multiplexer applications (both fault-protected and nonfault-protected)
• Industrial and process control systems
• Industrial
• USB 1.1 signal switching circuits
• Private Branch Exchange (PBX)
• Voice over IP/DSL – Integrated Access Devices, Smart
• Digital cross connects (DSX-1)
• Cross Connects
• PBXs
• Microprocessor controlled systems