19ns, 12ns SPST - NO 17Ohm Analog Switches BREAK-BEFORE-MAKE DG412 16 Pins 250pA 5V 16-TSSOP (0.173, 4.40mm Width)
SOT-23
DG412LDQ-T1-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-TSSOP (0.173, 4.40mm Width)
Number of Pins
16
Weight
172.98879mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2007
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
50Ohm
Terminal Finish
Matte Tin (Sn)
Subcategory
Multiplexer or Switches
Max Power Dissipation
450mW
Technology
BICMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
5V
Terminal Pitch
0.65mm
Time@Peak Reflow Temperature-Max (s)
40
Base Part Number
DG412
Output
SEPARATE OUTPUT
Pin Count
16
Qualification Status
Not Qualified
Power Supplies
3/12/+-5V
Number of Channels
1
Max Supply Voltage
12V
Min Supply Voltage
2.7V
Operating Supply Current
1μA
Nominal Supply Current
20nA
Power Dissipation
450mW
Max Supply Current
1μA
Throw Configuration
SPST
Turn On Delay Time
50 ns
Number of Inputs
4
Voltage - Supply, Single/Dual (±)
2.7V~12V ±3V~6V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-5V
Turn-Off Delay Time
35 ns
Max Dual Supply Voltage
6V
-3db Bandwidth
280MHz
On-State Resistance (Max)
17Ohm
Min Dual Supply Voltage
3V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
68 dB
Current - Leakage (IS(off)) (Max)
250pA
Channel Capacitance (CS(off), CD(off))
5pF 6pF
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
19ns, 12ns
Charge Injection
5pC
Crosstalk
-95dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
60ns
Normal Position
NO
Height
920μm
Length
5.08mm
Width
4.4mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
DG412LDQ-T1-E3 Product Details
DG412LDQ-T1-E3 Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. In total, there are 16 terminations. As a result of its 1 channels, this electronic component provides high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. There is an electrical component included in the 16 series. These analog multiplexers are built based on SPST - NO switching circuits. Using the DG412 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 50Ohm. For functions related to 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. normally, users should not supply switches with voltages higher than 12V. Analog switch ics with Dual, Single supply type are cost-effective. The lowest voltage fed to the electronic component should be 2.7V. An operating current of 1μA would be sufficient for this switch device. It may damage the digital multiplexer if the voltage is higher than 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 6VIf you are using a dual power supply, you should attach at least 3V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. Among the inputs that can be operated are the 4 inputs.
DG412LDQ-T1-E3 Features
1 Channels Switch Circuit: SPST - NO 1μA Supply Current -3db Bandwidth: 280MHz
DG412LDQ-T1-E3 Applications
There are a lot of Vishay Siliconix DG412LDQ-T1-E3 Analog Switches & Multiplexers ICs applications.