DG419BDY-T1 Overview

Shipping overseas is convenient due to the electrical component's packing in 8-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature around -40°C~85°C TA extended. Totally, there are 8 terminations. A high-quality output is provided by the electrical component's 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. The electrical component body receives 8 pins. Multiplexers built on a SPDT switching circuit are built. There are 1 circuits in this multiplexer. Internally, this switch multiplexer has a resistance of 25Ohm. For functions related to 8 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. A voltage higher than 36V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 13V. When the digital multiplexer is charged above 1μA, damage can occur. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. When using dual power supplies, you should attach at least 7V. It can operate from 20V operating voltages. Among the inputs that can be operated are the 2 inputs.

DG419BDY-T1 Features

1 Channels
Switch Circuit: SPDT

DG419BDY-T1 Applications

There are a lot of Vishay Siliconix DG419BDY-T1 Analog Switches & Multiplexers ICs applications.

• USB 1.1 signal switching circuits
• Private Branch Exchange (PBX)
• Power routing
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Video signal routing
• Automotive applications
• Medical
• Fiber to the Home
• Optical Applications
• HDTV