DG441LDY Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 16 terminations. A total of 16 pins are injected into the electrical part body. A SPST - NC switching circuit is used for these analog switches. In this multiplexer, the internal resistance is 30Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. 2.7V is the lowest voltage the electrical component should receive. Putting voltage greater than 1μA on the multiplexer may cause damage. There is no problem with using dual supply voltage, but it should not exceed 6V. With dual power supplies, you should attach at least 3V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. The 4 inputs need to be operated in order to work.

DG441LDY Features

Switch Circuit: SPST - NC
-3db Bandwidth: 280MHz

DG441LDY Applications

There are a lot of Vishay Siliconix
DG441LDY Analog Switches & Multiplexers ICs applications.

• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• New designs requiring multiplexer functions
• Cellular phones