130ns, 95ns SPST - NO 25Ohm Analog Switches BREAK-BEFORE-MAKE DG448 6 Pins 1nA 15V SOT-23-6 Thin, TSOT-23-6
SOT-23
DG448DV-T1-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
10 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
SOT-23-6 Thin, TSOT-23-6
Number of Pins
6
Weight
19.986414mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2013
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
6
Termination
SMD/SMT
Resistance
25Ohm
Terminal Finish
Matte Tin (Sn)
Subcategory
Multiplexer or Switches
Max Power Dissipation
570mW
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
15V
Terminal Pitch
0.95mm
[email protected] Reflow Temperature-Max (s)
40
Base Part Number
DG448
Output
SEPARATE OUTPUT
Pin Count
6
Number of Channels
1
Max Supply Voltage
36V
Min Supply Voltage
7V
Operating Supply Current
16μA
Nominal Supply Current
16μA
Power Dissipation
570mW
Max Supply Current
30μA
Throw Configuration
SPST
Turn On Delay Time
130 ns
Number of Inputs
1
Voltage - Supply, Single/Dual (±)
7V~36V ±4.5V~20V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
95 ns
Max Dual Supply Voltage
20V
On-State Resistance (Max)
25Ohm
Min Dual Supply Voltage
4.5V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
72 dB
Current - Leakage (IS(off)) (Max)
1nA
Channel Capacitance (CS(off), CD(off))
8pF
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
130ns, 95ns
Charge Injection
10pC
Switching
BREAK-BEFORE-MAKE
Drain to Source Resistance
17Ohm
Normal Position
NO
Height
1mm
Length
3.05mm
Width
1.65mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$2.744841
$2.744841
10
$2.589472
$25.89472
100
$2.442898
$244.2898
500
$2.304621
$1152.3105
1000
$2.174171
$2174.171
DG448DV-T1-E3 Product Details
DG448DV-T1-E3 Overview
The electrical component comes in SOT-23-6 Thin, TSOT-23-6 packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 1:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 6 terminations totally. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. It is injected into the electrical part body with 6 pins. A SPST - NO switching circuit is used to build these analog multiplexers. Search with DG448 if you are looking for analog multiplexer variants. This digital multiplexer has 25Ohm internal resistance. For functions related to 6 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 36V to a switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 7V. For this digital switch to work, 16μA current would suffice. A voltage higher than 30μA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 20VIf you are using dual power supplies, you should attach at least 4.5V. There are SEPARATE OUTPUT outputs on this analog switch ic. Among the inputs that can be operated are the 1 inputs. Drain to Source resistance for this electronic component is 17Ohm.
DG448DV-T1-E3 Features
1 Channels Switch Circuit: SPST - NO 16μA Supply Current Drain-to-Source resistance: 17Ohm
DG448DV-T1-E3 Applications
There are a lot of Vishay Siliconix DG448DV-T1-E3 Analog Switches & Multiplexers ICs applications.