Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DG451EY-T1-E3

  • DG451EY-T1-E3
  • DG451EY-T1-E3

DG451EY-T1-E3

DG451EY-T1-E3

Vishay Siliconix

118ns, 97ns SPST - NC 5.3Ohm Analog Switches BREAK-BEFORE-MAKE DG451 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)

SOT-23

DG451EY-T1-E3 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 13 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 665.986997mg
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2012
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 5.3Ohm
Terminal Finish MATTE TIN
Additional Feature ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 600mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 1.27mm
Reach Compliance Code unknown
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number DG451
Pin Count 16
Qualification Status Not Qualified
Polarity Non-Inverting
Number of Channels 1
Max Supply Voltage 36V
Min Supply Voltage 12V
Operating Supply Current 5μA
Nominal Supply Current 1nA
Power Dissipation 600mW
Max Supply Current 500nA
Throw Configuration SPST
Turn On Delay Time 118 ns
Number of Inputs 4
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 97 ns
Max Dual Supply Voltage 22V
On-State Resistance (Max) 5.3Ohm
Min Dual Supply Voltage 5V
High Level Output Current 100mA
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 31pf 34pF
On-state Resistance Match-Nom 0.13Ohm
Switch Circuit SPST - NC
Switch Time (Ton, Toff) (Max) 118ns, 97ns
Charge Injection 22pC
Channel-to-Channel Matching (ΔRon) 120m Ω
Crosstalk -85dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 256ns
Switch-off Time-Max 113ns
Drain to Source Resistance 4Ohm
Normal Position NC
Voltage - Supply, Dual (V±) ±5V~15V
Height 1.55mm
Length 10mm
Width 4mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $3.040314 $3.040314
10 $2.868220 $28.6822
100 $2.705868 $270.5868
500 $2.552706 $1276.353
1000 $2.408213 $2408.213
DG451EY-T1-E3 Product Details

DG451EY-T1-E3 Overview


The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. The total number of terminations is 16. As a result of its 1 channels, this electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. Based on SPST - NC switching circuits, these analog multiplexers work. Use DG451 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 5.3Ohm. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 36V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 12V should be applied to the electronic component. This multiplexer would work with 5μA current. If you put voltage higher than 500nA on the digital multiplexer, damage may occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. A dual power supply should have at least 5V voltage attached. A 4 input needs to be operated. Don't miss this electronic component's additional features, such as: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY. There is 4Ohm resistance between the Drain and Source on this part.

DG451EY-T1-E3 Features


1 Channels
Switch Circuit: SPST - NC
5μA Supply Current
Additional Features: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY
Drain-to-Source resistance: 4Ohm


DG451EY-T1-E3 Applications


There are a lot of Vishay Siliconix
DG451EY-T1-E3 Analog Switches & Multiplexers ICs applications.


  • Low-Voltage
  • Isolation
  • Medical
  • Imaging
  • Ultrasound
  • Audio and video switching
  • Automatic test equipment
  • Precision data acquisition
  • Battery-powered systems
  • Sample-and-hold systems

Related Part Number

74HCT4851PW,112
Nexperia USA Inc.
74HCT4851PW,112
$0 $/piece
MC14051BDG
ON Semiconductor
MC14051BDG
$0 $/piece
ADG723BRMZ-REEL7
Analog Devices Inc.
ADG723BRMZ-REEL7
$0 $/piece
MAX379CWG+
Maxim Integrated
MAX379CWG+
$0 $/piece
TS5A3159MDBVREP
Texas Instruments
TS5A3159MDBVREP
$0 $/piece
MC74LVX8053DR2G
ON Semiconductor
MC74LVX8053DR2G
$0 $/piece
TS5A22362YZPR
Texas Instruments
TS5A22362YZPR
$0 $/piece
PI3A223ZMEX
Diodes Incorporated
PI3A223ZMEX
$0 $/piece
ISL84781IRZ
Renesas Electronics America Inc.
ISL84781IRZ
$0 $/piece
SW06GSZ
Analog Devices Inc.
SW06GSZ
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News