DG453EY-T1-E3 Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 1:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~125°C TA is the extended operating temperature. In total, 16 terminations have occurred. Due to its 1 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. 16 pins are injected to the electronic part body. The analog switch ics are built using SPST - NO/NC switching circuits. This multiplexer is composed of 4 circuits. If you are looking for variants of the digital switch, trying search with DG453. It has an internal resistance of 5.3Ohm. The functions of 16 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 36V volts for the multiplexer. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 12V. This digital switch can be operated with a current of 5μA. Putting voltage greater than 500nA on the multiplexer may cause damage. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. You should attach at least 5V voltage if you are using dual power supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Operating the 4 inputs requires 4 inputs. Don’t miss additional features of the electronic component such as: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY.

DG453EY-T1-E3 Features

1 Channels
Switch Circuit: SPST - NO/NC
5μA Supply Current
Additional Features: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY

DG453EY-T1-E3 Applications

There are a lot of Vishay Siliconix DG453EY-T1-E3 Analog Switches & Multiplexers ICs applications.

• FTTH
• DSLAMs
• E1 Network Equipment
• Central office
• PCMCIA cards
• SDH/SONET multiplexers
• Isolation
• High speed data transmission line cards
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Modems