118ns, 97ns SPST - NO 5.3Ohm Analog Switches BREAK-BEFORE-MAKE DG455 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)
SOT-23
DG455EQ-T1-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
15 Weeks
Contact Plating
Tin
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-TSSOP (0.173, 4.40mm Width)
Number of Pins
16
Weight
172.98879mg
Operating Temperature
-40°C~125°C TA
Packaging
Tape & Reel (TR)
Published
2017
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
7.3Ohm
Additional Feature
ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY
Subcategory
Multiplexer or Switches
Max Power Dissipation
450mW
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
5V
Terminal Pitch
0.65mm
Time@Peak Reflow Temperature-Max (s)
40
Base Part Number
DG455
Pin Count
16
Polarity
Non-Inverting
Number of Channels
1
Number of Circuits
4
Max Supply Voltage
36V
Min Supply Voltage
12V
Operating Supply Current
100μA
Power Dissipation
450mW
Max Supply Current
100μA
Throw Configuration
SPST
Turn On Delay Time
118 ns
Number of Inputs
4
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-5V
Turn-Off Delay Time
97 ns
Max Dual Supply Voltage
22V
On-State Resistance (Max)
5.3Ohm
Min Dual Supply Voltage
5V
High Level Output Current
100mA
Dual Supply Voltage
15V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
60 dB
Current - Leakage (IS(off)) (Max)
500pA
Channel Capacitance (CS(off), CD(off))
31pf 34pF
On-state Resistance Match-Nom
0.12Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
118ns, 97ns
Charge Injection
22pC
Channel-to-Channel Matching (ΔRon)
120m Ω
Crosstalk
-85dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Switch-off Time-Max
112ns
Normal Position
NO
Voltage - Supply, Dual (V±)
±5V~15V
Height
920μm
Length
5.08mm
Width
4.4mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
3,000
$1.86865
$5.60595
DG455EQ-T1-E3 Product Details
DG455EQ-T1-E3 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature around -40°C~125°C TA extended. The total number of terminations is 16. A 1 channel electronic part produces high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. This electrical component is included in the 16 series of products. SPST - NO switching circuits are used in these analog switch ics. This multiplexer is composed of 4 circuits. Try searching with DG455 to find analog multiplexer variants. The internal resistance of this digital multiplexer is 7.3Ohm. You can find the functions of the 16 pins in the datasheets. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. An effective Dual, Single supply digital multiplexer. There should be 12V voltage fed to the electrical part below 12V. It would be sufficient to run this analogue multiplexer with 100μA current. Putting voltage greater than 100μA on the multiplexer may cause damage. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. The voltage should be at least 5V if you are using dual power supplies. It is possible to operate 4 inputs. Additional features of the electronic component include: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY.
DG455EQ-T1-E3 Features
1 Channels
Switch Circuit: SPST - NO
100μA Supply Current
Additional Features: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY
DG455EQ-T1-E3 Applications
There are a lot of Vishay Siliconix DG455EQ-T1-E3 Analog Switches & Multiplexers ICs applications.