Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DG456EQ-T1-E3

  • DG456EQ-T1-E3
  • DG456EQ-T1-E3

DG456EQ-T1-E3

DG456EQ-T1-E3

Vishay Siliconix

118ns, 97ns SPST - NO/NC 5.3Ohm Analog Switches BREAK-BEFORE-MAKE DG456 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)

SOT-23

DG456EQ-T1-E3 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 15 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 172.98879mg
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2016
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 7.3Ohm
Terminal Finish MATTE TIN
Additional Feature ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 450mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 0.65mm
[email protected] Reflow Temperature-Max (s) 40
Base Part Number DG456
Output SEPARATE OUTPUT
Pin Count 16
Number of Channels 1
Number of Circuits 4
Max Supply Voltage 36V
Min Supply Voltage 12V
Operating Supply Current 100μA
Power Dissipation 450mW
Max Supply Current 100μA
Throw Configuration SPST
Turn On Delay Time 118 ns
Number of Inputs 4
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 97 ns
Max Dual Supply Voltage 22V
On-State Resistance (Max) 5.3Ohm
Min Dual Supply Voltage 5V
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 60 dB
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 31pf 34pF
On-state Resistance Match-Nom 0.12Ohm
Switch Circuit SPST - NO/NC
Switch Time (Ton, Toff) (Max) 118ns, 97ns
Charge Injection 22pC
Channel-to-Channel Matching (ΔRon) 120m Ω
Crosstalk -85dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-off Time-Max 112ns
Voltage - Supply, Dual (V±) ±5V~15V
Height 920μm
Length 5.08mm
Width 4.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $4.012811 $4.012811
10 $3.785671 $37.85671
100 $3.571388 $357.1388
500 $3.369234 $1684.617
1000 $3.178522 $3178.522
DG456EQ-T1-E3 Product Details

DG456EQ-T1-E3 Overview


Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. 1:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -40°C~125°C TA are extended for operation. The total number of terminations is 16. A high-quality output is provided by the electrical component's 1 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. This electronic part can be found in the 16 series. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. 4 circuits are used in this analogue multiplexer. Look for analog switch ic variants by searching with DG456. This digital multiplexer has 7.3Ohm internal resistance. The datasheets for the 16 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. It is normally recommended that users do not supply the multiplexer with voltages higher than 36V. Dual, Single supply type digital switch with a low cost. A low voltage of 12V should be applied to the electronic component. This multiplexer would work with 100μA current. The analogue multiplexer may be damaged if voltage is greater than 100μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. It is recommended that you attach at least 5V to your dual power supply. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. In order to operate the 4 inputs, there are several steps to follow. Additional features of the electronic component include: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY.

DG456EQ-T1-E3 Features


1 Channels
Switch Circuit: SPST - NO/NC
100μA Supply Current
Additional Features: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY

DG456EQ-T1-E3 Applications


There are a lot of Vishay Siliconix DG456EQ-T1-E3 Analog Switches & Multiplexers ICs applications.

  • Audio and video routing
  • Precision data acquisition
  • Channel Banks
  • T1/E1 Terminals
  • E1 Multiplexer
  • Automotive applications
  • 65 V DACs
  • New designs requiring multiplexer functions
  • Mechanical reed relay replacement
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads

Related Part Number

MAX378CPE+
Maxim Integrated
MAX378CPE+
$0 $/piece
MAX4553ESE+
Maxim Integrated
MAX4553ESE+
$0 $/piece
74HCT4066BQ,115
Nexperia USA Inc.
74HCT4066BQ,115
$0 $/piece
MAX333ACWP+
Maxim Integrated
MAX333ACWP+
$0 $/piece
ADG431BRZ-REEL7
Analog Devices Inc.
ADG431BRZ-REEL7
$0 $/piece
MAX4702ETE+T
Maxim Integrated
MAX4702ETE+T
$0 $/piece
NLAS5157MUTCG
ON Semiconductor
NLAS5157MUTCG
$0 $/piece
DG301ACJ+
Maxim Integrated
DG301ACJ+
$0 $/piece
MM74HC4053WMX
Rochester Electronics, LLC
MM74HC4053WMX
$0 $/piece
AD8116JST
Rochester Electronics, LLC
AD8116JST
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News