Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DG470EQ-T1-E3

DG470EQ-T1-E3

DG470EQ-T1-E3

Vishay Siliconix

166ns, 108ns SPDT 6Ohm Analog Switches BREAK-BEFORE-MAKE DG470 8 Pins 500pA 15V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

SOT-23

DG470EQ-T1-E3 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 12 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins 8
Weight 139.989945mg
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Resistance 8Ohm
Terminal Finish MATTE TIN
Subcategory Multiplexer or Switches
Max Power Dissipation 320mW
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
Terminal Pitch 0.65mm
Reach Compliance Code unknown
[email protected] Reflow Temperature-Max (s) 40
Base Part Number DG470
Pin Count 8
Number of Outputs 2
Qualification Status Not Qualified
Number of Channels 1
Max Supply Voltage 36V
Min Supply Voltage 12V
Operating Supply Current 3μA
Nominal Supply Current 3μA
Power Dissipation 320mW
Max Supply Current 6μA
Turn On Delay Time 166 ns
Number of Inputs 1
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 108 ns
Max Dual Supply Voltage 22V
On-State Resistance (Max) 6Ohm
Min Dual Supply Voltage 4.5V
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 2:1
Off-state Isolation-Nom 57 dB
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 37pF 85pF
On-state Resistance Match-Nom 0.4Ohm
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 166ns, 108ns
Charge Injection 58pC
Channel-to-Channel Matching (ΔRon) 120m Ω
Crosstalk -63dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Voltage - Supply, Dual (V±) ±4.5V~15V
Height 850μm
Length 3mm
Width 3mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
2,500 $0.60200 $1.204
5,000 $0.57190 $2.8595
12,500 $0.55040 $6.6048
DG470EQ-T1-E3 Product Details

DG470EQ-T1-E3 Overview


As the electronic part is packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad, international shipping is convenient. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 2:1. Temperatures around -40°C~125°C TA are extended for operation. 8 terminations have been made so far. The electronic part provides high-quality output because it has 1 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. 8 pins are injected to the electronic part body. On the other hand, analog switches can be constructed using SPDT switching circuits. Look for analog switch ic variants by searching with DG470. The internal resistance of this digital multiplexer is 8Ohm. For functions related to 8 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 36V. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage fed to the electronic component should be 12V. For this multiplexer to operate, 3μA current would be sufficient. When the digital multiplexer is charged above 6μA, damage can occur. For this switch, a dual supply voltage is feasible, but it must not exceed 22VIn the case of dual power supplies, you should connect at least 4.5V. Operating the 1 inputs requires 1 inputs. The analog switch ics includes 2 outputs.

DG470EQ-T1-E3 Features


1 Channels
Switch Circuit: SPDT
3μA Supply Current

DG470EQ-T1-E3 Applications


There are a lot of Vishay Siliconix DG470EQ-T1-E3 Analog Switches & Multiplexers ICs applications.

  • Microprocessor Controlled Analog Systems
  • New designs requiring multiplexer functions
  • Battery Powered Systems
  • Isolation
  • Remote wireless modules
  • DVD-R
  • Medical
  • Intelligent PBX
  • Existing multiplexer applications (both fault-protected and nonfault-protected)
  • ADCs such as AD7840/8, AD7870/1/2/4/5/6/8

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News