DG507BEW-T1-GE3 Overview

The electronic component is convenient to ship overseas because it is packed in a 28-SOIC (0.295, 7.50mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. There is 8:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. A total of 28 terminations have been recorded. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. There is an electrical component included in the 28 series. There are 2 circuits in this switch device. Using the DG507 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 450Ohm. To find out what the 28 pins do, please refer to the datasheets. In normalcircumstances, users should not exceed 44V volts for the multiplexer. An effective Dual, Single supply digital multiplexer. There should be 12V voltage fed to the electrical part below 12V. This multiplexer would work with 100μA current. There is no problem with using dual supply voltage, but it should not exceed 20V. For dual power supplies, a voltage of at least 5V should be attached. There are 16 inputs to be operated.

DG507BEW-T1-GE3 Features

1 Channels
100μA Supply Current
-3db Bandwidth: 217MHz

DG507BEW-T1-GE3 Applications

There are a lot of Vishay Siliconix DG507BEW-T1-GE3 Analog Switches & Multiplexers ICs applications.

• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• PDAs
• Modems
• Channel Banks
• Digital access cross connects
• Communications systems
• Audio and video routing
• Avionics and Military Systems
• Video signal routing
• E1 Multiplexer