DG529AK/883 Overview

As the electronic part is packed in 18-CDIP (0.300, 7.62mm), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Through Hole. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -55°C~125°C TA. Total terminations are 18. The electronic part provides high-quality output because it has 4 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. The electrical component body receives 18 pins. Circuits based on SP4T switching are used to construct these analog switch ics. There are 2 circuits in this switch device. An switch multiplexer with 400Ohm internal resistance has a value of 400Ohm. Datasheets for 18 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 36V in normal situations. The lowest voltage the electronic part should receive is 13V. Despite this switch device's dual supply capability, its voltage should not exceed 22V. It is recommended that you attach at least 7V to your dual power supply. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board.

DG529AK/883 Features

4 Channels
Switch Circuit: SP4T

DG529AK/883 Applications

There are a lot of Vishay Siliconix
DG529AK/883 Analog Switches & Multiplexers ICs applications.

• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement