DG613DY-T1-E3 Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:2. Increasing operating temperature to around -40°C~85°C TA. In total, there are 16 terminations. Due to its 1 channels, the electrical component produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. The electrical component body receives 16 pins. The analog switch ics are built using DPDT switching circuits. There are 1 circuits in this multiplexer. Try searching for the analog switch ic with DG613 if you are looking for variants. In this multiplexer, the internal resistance is 45Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 18V volts for the multiplexer. A analog switch ic that has a cost-effective Dual, Single supply type. 10V is the lowest voltage the electrical component should receive. An operating current of -1μA would be sufficient for this switch device. The analogue multiplexer may be damaged if voltage is greater than 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 15VFor dual power supplies, a voltage of at least 10V should be attached. You shouldn't miss the additional features of the electrical component, such as: VIDEO APPLICATION. In this digital multiplexer, there are 4 outputs.

DG613DY-T1-E3 Features

1 Channels
Switch Circuit: DPDT
-1μA Supply Current
-3db Bandwidth: 500MHz
Additional Features: VIDEO APPLICATION

DG613DY-T1-E3 Applications

There are a lot of Vishay Siliconix DG613DY-T1-E3 Analog Switches & Multiplexers ICs applications.

• Audio and video routing
• 65 V DACs
• Medical
• Cross Connects
• Data Acquisition Systems
• SONET
• Avionics
• New designs requiring multiplexer functions
• High-Voltage
• Precision test equipment