DG642DJ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. In Through Hole, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Around -40°C~85°C TA is the extended operating temperature. There are 8 terminations totally. As part of the design of the 8 series, this electronic part has been incorporated into the system. A SPDT switching circuit is used for these analog switches. This digital multiplexer has 8Ohm internal resistance. For functions related to 8 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. normally, users should not supply switches with voltages higher than 18V. Analogue multiplexer with a Single supply type that is cost-effective. 10V is the lowest voltage the electrical component should receive. The analogue multiplexer may be damaged if voltage is greater than 6mA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 15V. If you are using a dual power supply, you should attach at least 10V. This product is integrated with an analog integrated circuit (IC) of type DPST. Operating voltages range from 15V. The electrical component supports 1 inputs. The transfer of data can be performed over 500MHz bandwidths. Resistivity from Drain to Source is 8Ohm for this electronic part. An output of 2 is provided by the digital multiplexer.

DG642DJ Features

Switch Circuit: SPDT
Bandwidth: 500MHz
Drain-to-Source resistance: 8Ohm

DG642DJ Applications

There are a lot of Vishay Siliconix DG642DJ Analog Switches & Multiplexers ICs applications.

• Transmit
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Frame Relay Equipment
• ISDN NT1/TA
• PDAs
• Multiplexers
• Mechanical reed relay replacement
• Microwave transmission systems
• PBXs