30ns, 35ns SPST - NO 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG721 8 Pins 250pA 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
SOT-23
DG721DQ-T1-GE3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
12 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins
8
Weight
139.989945mg
Operating Temperature
-40°C~85°C TA
Packaging
Digi-Reel®
Published
2009
JESD-609 Code
e4
Part Status
Discontinued
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
Resistance
4.5Ohm
Additional Feature
VIDEO APPLICATION
Subcategory
Multiplexer or Switches
Max Power Dissipation
320mW
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Number of Functions
2
Supply Voltage
3V
Terminal Pitch
0.65mm
Base Part Number
DG721
Output
SEPARATE OUTPUT
Pin Count
8
Power Supplies
3/5V
Number of Channels
1
Max Supply Voltage
5.5V
Min Supply Voltage
1.8V
Operating Supply Current
2μA
Power Dissipation
320mW
Max Supply Current
2μA
Throw Configuration
SPST
Turn On Delay Time
30 ns
Number of Inputs
2
Supply Type
Single
Turn-Off Delay Time
35 ns
-3db Bandwidth
366MHz
On-State Resistance (Max)
4.5Ohm
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
47 dB
Current - Leakage (IS(off)) (Max)
250pA
Channel Capacitance (CS(off), CD(off))
8pF 9pF
On-state Resistance Match-Nom
0.3Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
30ns, 35ns
Charge Injection
2.2pC
Channel-to-Channel Matching (ΔRon)
200m Ω
Crosstalk
-90dB @ 10MHz
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
55ns
Switch-off Time-Max
40ns
Voltage - Supply, Single (V+)
1.8V~5.5V
Normal Position
NO
Height
950μm
Length
3mm
Width
3.1mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
DG721DQ-T1-GE3 Product Details
DG721DQ-T1-GE3 Overview
This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad, making it easy to ship abroad. High reliability is provided by advanced packaging method Digi-Reel?. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 1:1. Operational temperature extended around -40°C~85°C TA. Total terminations are 8. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. An electrical component of this type can be found in the 8 series. Multiplexers built on a SPST - NO switching circuit are built. DG721 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 4.5Ohm. To find out what the functions of 8 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Multiplexers should not be powered above 5.5V in normal situations. Digital switch that provides Single power at a cost-effective price. It is recommended to use 1.8V as the lowest voltage for the electrical part. It would be sufficient to run this analogue multiplexer with 2μA current. Analogue multiplexers require a 1.8V~5.5V voltage to drain from a single voltage supply. Putting voltage greater than 2μA on the multiplexer may cause damage. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Among the inputs that can be operated are the 2 inputs. Don't forget the additional features of this electronic part, such as: VIDEO APPLICATION.
DG721DQ-T1-GE3 Features
1 Channels Switch Circuit: SPST - NO 2μA Supply Current -3db Bandwidth: 366MHz Additional Features: VIDEO APPLICATION
DG721DQ-T1-GE3 Applications
There are a lot of Vishay Siliconix DG721DQ-T1-GE3 Analog Switches & Multiplexers ICs applications.
Switching Systems
Cross Connects
Voice over IP/DSL – Integrated Access Devices, Smart
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads