DG9051DQ-T1-E3 Overview

Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 8:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 8 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. There are 1 circuits in this multiplexer. Try searching with DG9051 if you're looking for variants. There is 500mOhm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. A voltage higher than 12V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 2.7V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 1μA current would be sufficient. The analogue multiplexer may be damaged if voltage is greater than 1μA. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 2.7V. 3V operating voltages are supported by the electronic component. Drain to Source resistance is 30Ohm.

DG9051DQ-T1-E3 Features

8 Channels
1μA Supply Current
Drain-to-Source resistance: 30Ohm

DG9051DQ-T1-E3 Applications

There are a lot of Vishay Siliconix
DG9051DQ-T1-E3 Analog Switches & Multiplexers ICs applications.

• Transmit
• Low-Voltage
• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems