DG9433DQ-T1-E3 Overview

The electrical component comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature around -40°C~85°C TA extended. The electronic part provides high-quality output because it has 2 channels. On the other hand, analog switches can be constructed using SPST - NO switching circuits. The circuits in this analogue multiplexer number 2. Search with DG9433 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 60Ohm. For functions related to 8 pins, please refer to the datasheets. A voltage higher than 12V should not normally be supplied to the switches. The digital multiplexer has a low cost Single supply. A low voltage of 2.7V should be applied to the electronic component. In order to operate this switch device, it would need a current of 1μA. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~12V. If put voltage greater than -1μA on the device, damage may be caused to the analogue multiplexer. The 2 inputs need to be operated in order to work. Temperatures over 85°C should not be allowed for the multiplexer to operate. In this digital multiplexer, there are 2 outputs. Suppliers offer 8-MSOP packages.

DG9433DQ-T1-E3 Features

2 Channels
Switch Circuit: SPST - NO
1μA Supply Current

DG9433DQ-T1-E3 Applications

There are a lot of Vishay Siliconix DG9433DQ-T1-E3 Analog Switches & Multiplexers ICs applications.

• Audio and video signal routing
• Multi-Line E1 Interface Cards
• Digital cross connects (DSX-1)
• Frame Relay Equipment
• Sample-and-hold systems
• PBX interfaces
• Remote wireless modules
• Relay replacements
• E1 Multiplexer
• DSUs