DG9433DS-T1-E3 Overview

Shipping overseas is convenient with the electronic component packed in SOT-23-8. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 8. High-quality output is provided by the electronic component's 1 channels. When a voltage supply of 3V is used, the electronic component should be turned on and run. Electronic part bodies are injected with 8 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. A total of 2 circuits make up this switch device. Try searching for DG9433 variants of the analog switch ic. In this multiplexer, the internal resistance is 60Ohm. For details about the functions of 8 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. An effective Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2.7V. 1μA current would be enough for this multiplexer to operate. A voltage of 2.7V~12V is required for this switch device, which drains from a single voltage source. The switch multiplexer may be damaged if it is exposed to voltage greater than -1μA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.

DG9433DS-T1-E3 Features

1 Channels
Switch Circuit: SPST - NO
1μA Supply Current

DG9433DS-T1-E3 Applications

There are a lot of Vishay Siliconix DG9433DS-T1-E3 Analog Switches & Multiplexers ICs applications.

• PBX interfaces
• MP3 players
• PBXs
• Video signal routing
• Precision data acquisition
• RGB switches
• Communications systems
• Medical systems
• Audio and video switching
• Existing multiplexer applications (both fault-protected and nonfault-protected)