SI9145BY-E3 Overview

In the 16-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Bulk solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control operates at 2.7V~7V and has a 2.7V~7V supply voltage. Suitable for working in an dc switcher that has a -25°C~85°C TA. In this switching controller, the switch can be set to 2kHz~2MHz. Surface Mount makes it suitable for general dc dc regulator. Enable, Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. Search for "SI9145" to find other relevant dc to dc converter ics. Total pins of switching converter are 16. Statistically, DC regulator outputs 2.6V volts. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. DC regulator's maximum frequency is 2MHz. Temperatures should be kept at -25°C or higher. There should be 85°C more than 85°C degrees Celsius in the machine. A 16-SOIC would be the supplier dc dc controller package for this part. Voltage maximum is rated 7V.

SI9145BY-E3 Features

Transistor Driver Outputs
Switching Frequency: 2kHz~2MHz
Enable, Frequency Control, Soft Start
Max Duty Cycle: 100 %

SI9145BY-E3 Applications

There are a lot of Vishay Siliconix SI9145BY-E3 DC to DC converter applications.

• Shearing machines
• Various CNC machine tools
• Terrestrial set-top boxes
• Alternators
• Magnetohydrodynamic power
• Electrical power transmission
• Flaw detection equipment
• Motor controller circuits
• Production lines
• Smoke prevention equipment