W25P16VSSIG Overview

Non-Volatile is its memory type. It is available in a case with a Tube shape. As you can see, it is embedded in 8-SOIC (0.209, 5.30mm Width) case. There is an 16Mb 2M x 8 memory capacity on the chip. In this device, the memory is of the FLASH-format, which is a popular format in the mainstream computing sector. Due to its extended operating temperature range, the device is well suited for a wide range of demanding applications. A voltage of 2.7V~3.6V is possible to be applied to the supply. There is a recommendation that Surface Mount mounting type should be used for this product. As you can see from the diagram, the chip is planted with 8 terminations. In total, 1 functions are supported by this part. The memory device designed for this application has been designed to be powered by an 3V power supply. With a clock frequency of 50MHz, the memory rotates on its own. It is encased in an 8-pin package that contains this ic memory chip. It has 8 pins indicating it has 8 memory locations. This memory chip requires a mere 3/3.3V of power. Among the SpiFlash® series of memory devices, this part is essential for its applications. By integrating with the SPI-type serial bus, this memory transmits data to the processor. This memory ics is capable of operating with an input current of 0.032mA at max. A programming voltage of 2.7V is needed to alter the state of certain nonvolatile memory arrays.

W25P16VSSIG Features

Package / Case: 8-SOIC (0.209, 5.30mm Width)
8 Pins

W25P16VSSIG Applications

There are a lot of Winbond Electronics
W25P16VSSIG Memory applications.

• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card
• hard disk drive (HDD)