Welcome to Hotenda.com Online Store!

logo
userjoin
Home

W25P40VSNIG

W25P40VSNIG

W25P40VSNIG

Winbond Electronics

3/3.3V V SpiFlash® 8 Pin Memory IC SpiFlash® Series 4.85mm mm

SOT-23

W25P40VSNIG Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Operating Temperature -40°C~85°C TA
Packaging Tube
Series SpiFlash®
Published 2006
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
HTS Code 8542.32.00.51
Technology CMOS
Voltage - Supply 2.7V~3.6V
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 1.27mm
Reach Compliance Code unknown
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 8
JESD-30 Code R-PDSO-G8
Qualification Status Not Qualified
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3/3.3V
Supply Voltage-Min (Vsup) 2.7V
Interface SPI, Serial
Memory Size 4Mb 512K x 8
Memory Type Non-Volatile
Operating Mode SYNCHRONOUS
Clock Frequency 40MHz
Supply Current-Max 0.025mA
Access Time 40 μs
Memory Format FLASH
Memory Interface SPI
Organization 4MX1
Memory Width 1
Write Cycle Time - Word, Page 5ms
Standby Current-Max 0.000005A
Memory Density 4194304 bit
Programming Voltage 2.7V
Serial Bus Type SPI
Endurance 100000 Write/Erase Cycles
Data Retention Time-Min 20
Write Protection HARDWARE/SOFTWARE
Length 4.85mm
Height Seated (Max) 1.72mm
Width 3.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
W25P40VSNIG Product Details

W25P40VSNIG Overview


In this case, the memory type of the device can be classified as Non-Volatile. Case Tube is available. An embedded 8-SOIC (0.154, 3.90mm Width) case surrounds memory ics. It is estimated that the memory size on the chip is 4Mb 512K x 8. As with most mainstream devices, this one uses FLASH-format memory. Due to its wide temperature range of -40°C~85°C TA, this device is well suited to a wide range of applications that require high performance. With 2.7V~3.6V as the supply voltage, it is capable of handling memory ics. It is recommended to mount it in the Surface Mount mounting type. It is planted on the chip with 8 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 3V to be supplied to this ic memory chip in order to operate. In order to operate effectively, the memory rotates at a clock frequency within a range of 40MHz. The memory device has a total of 8 pins, thus indicating that it has a total of 8 memory locations. In terms of power requirements, this memory chip uses only 3/3.3V . This part, which belongs to the SpiFlash® series of memory devices, plays an important role in its target applications. It is helpful to carry data to the CPU using the SPI-type serial bus that this memory integrates with. In terms of power consumption, it can operate at a maximum supply of 0.025mA . Nonvolatile memory arrays require 2.7V programming voltages to change their states.

W25P40VSNIG Features


Package / Case: 8-SOIC (0.154, 3.90mm Width)


W25P40VSNIG Applications


There are a lot of Winbond Electronics
W25P40VSNIG Memory applications.


  • networking
  • personal computers
  • servers
  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory
  • Camcorders

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News