W25X80VSSIG Overview

A Non-Volatile-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tube case as well. Embedded in the 8-SOIC (0.209, 5.30mm Width) case, memory ics is a single file. On the chip, there is an 8Mb 1M x 8 memory, which is the size of the chip's memory. There is a FLASH-format memory used in this device, which is the memory format used by mainstream devices. Featuring an extended operating temperature range of -40°C~85°C TA, this device allows it to be used in a variety of demanding applications. The device is capable of handling a supply voltage of 2.7V~3.6V volts. The recommended mounting type for memory ics is Surface Mount. A total of 8 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3V will be necessary. A clock frequency rotation within 75MHz is used for the ic memory chip to rotate data. The memory device in question has 8 pins, thus indicating that it has 8 memory locations that can be accessed. This chip features all the merits of a conventional chip, but it also features SYNCHRONOUS MODE ALSO POSSIBLE to improve system performance. As for power supplies, this memory chip requires just 3/3.3V . It is an important component of the SpiFlash® series memory devices used in a variety of applications. Its SPI-type serial bus helps transfer data to the CPU efficiently. In order to operate your device, you will need to provide a maximum supply current of 0.025mA. A programming voltage of 2.7V is required to change a nonvolatile memory array's state.

W25X80VSSIG Features

Package / Case: 8-SOIC (0.209, 5.30mm Width)
Additional Feature:SYNCHRONOUS MODE ALSO POSSIBLE

W25X80VSSIG Applications

There are a lot of Winbond Electronics
W25X80VSSIG Memory applications.

• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card