XCR3128XL-10VQ100Q Overview

128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The device is programmed with 84 I/O ports.It is programmed to terminate devices at 100.There is a QUAD terminal position on the electrical part in question.The device is powered by a voltage of 3.3V volts.It is a part of the family Programmable Logic Devices.With 100 pins programmed, the chip is ready to use.When using this device, YES is also available.If high efficiency is desired, the supply voltage should be kept at 3.3V.It is recommended that data be stored in EEPROM.The pins are 100.Initially, the maximum supply voltage (Vsup) is 3.6V.It is recommended that the operating temperature be higher than -40°C.It is recommended that the operating temperature be below 125°C.8 logic blocks (LABs) make up this circuit.If the maximal frequency is less than 95MHz, it should be lower than that.In programmable logic, a type of logic can be categorized as EE PLD.

XCR3128XL-10VQ100Q Features

84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)

XCR3128XL-10VQ100Q Applications

There are a lot of Xilinx
XCR3128XL-10VQ100Q CPLDs applications.

• Digital systems
• Portable digital devices
• Handheld digital devices
• Battery operated portable devices
• Complex programmable logic devices
• Digital designs
• Field programmable gate
• Address decoding
• D/T registers and latches
• Synchronous or asynchronous mode