XC95144-10PQ160I Overview

Currently, there are 144 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There is a 160-BQFP package containing it.It is programmed with 133 I/Os.There are 160 terminations programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.Power is supplied by a voltage of 5V volts.There is a part in the family [0].Trayshould be used to package the chip.To ensure its reliability, the operating temperature is set to [0].Ideally, the chip should be mounted by Surface Mount.As part of the XC9500series, it is a type of FPGA.Chips are programmed with 160 pins.It is also characterized by YES.The XC95144contains its related parts.In digital circuits, 3200gates serve as building blocks.If high efficiency is desired, the supply voltage should be kept at [0].Data storage is performed using [0].The electronic component is mounted by Surface Mount.The 160pins are designed into the board.There should be a lower maximum frequency than 66.7MHz.In order to form a fundamental building block, there are 8logic elements/cells.

XC95144-10PQ160I Features

160-BQFP package
133 I/Os
The operating temperature of -40°C~85°C TA
160 pin count
160 pins

XC95144-10PQ160I Applications

There are a lot of Xilinx Inc. XC95144-10PQ160I CPLDs applications.

• DDC INTERFACE
• Cross-Matrix Switch
• LED Lighting systems
• Bootloaders for FPGAs
• USB Bus
• Dedicated input registers
• INTERRUPT SYSTEM
• POWER-SAVING MODES
• Digital systems
• D/T registers and latches