XC9572XL-7TQG100C Overview

There are 72 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is embedded in the 100-LQFP package.The device is programmed with 72 I/Os.There is a 100terminations set on devices.This electrical part has a terminal position of QUADand is connected to the ground.It is powered by a voltage of 3.3V volts.It is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Chips should be mounted by Surface Mount.In FPGA terms, it is a type of XC9500XLseries FPGA.It has 100pins programmed.In accordance with the [0], its related parts are listed.It is possible to construct digital circuits using 1600gates, which are devices that serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is recommended to store data in [0].In this case, it is mounted by Surface Mount.The 100pins are designed into the board.A maximum supply voltage of 3.6Vis used in its operation.The device is designed to operate with a minimal supply voltage of 3VV.The frequency that can be achieved is 125MHz.A fundamental building block consists of 4logic elements/cells.

XC9572XL-7TQG100C Features

100-LQFP package
72 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins

XC9572XL-7TQG100C Applications

There are a lot of Xilinx Inc. XC9572XL-7TQG100C CPLDs applications.

• Power Meter SMPS
• Synchronous or asynchronous mode
• Timing control
• Random logic replacement
• Multiple DIP Switch Replacement
• DDC INTERFACE
• USB Bus
• ANALOG-TO-DIGITAL CONVERTOR (ADC)
• Dedicated input registers
• Bootloaders for FPGAs