XCF128XFTG64C Overview

FPGA uses a neat 64-TBGA package.Packaging for the external use of Tray.-40°C~85°C-qualified.The In System Programmable programming language can be used to program it.With a voltage of 1.7V~2V, it is powered.Surface Mount is the mounting position of this memory device.Data storage is limited to a size of 128Mb bytes.You can search "XCF128X" for other related parts.Supply voltage 1.8V is required.64 terminations with different functions.FPGA is possible to use this memory device wFPGAh a maximum voltage of 2V.If the device needs to be supplied with power, then a minimum voltage of 1.7V is required.The reflow soldering process should be done at a temperature no higher than 260.In this case, it has 64 pins.In this memory, data is transmitted using the PARALLEL process.The memory chip operates at a voltage of no more than 0.053mA.In the package, you will find a set of 64 pins.The best power supply to use is a 1.81.8/3.3V power supply, which is highly recommended.Known as a FLASH memory.The switching controller works at a frequency of 50MHz.

XCF128XFTG64C Features

Operating temperature: -40°C~85°C.
In System Programmable program capability.
PARALLEL processing.
FLASH memory
Frequency: 50MHz.

XCF128XFTG64C Applications

There are a lot of Xilinx Inc. XCF128XFTG64C applications of configuration proms for FPGAs.

• cell phones
• eDRAM
• servers
• workstations,
• Camcorders
• graphics card
• hard disk drive (HDD)
• nonvolatile BIOS memory
• Cache memory
• embedded logic