XCR3128XL-10VQG100I Overview

128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a 100-TQFP package.The device is programmed with 84 I/O ports.It is programmed to terminate devices at 100.There is a QUAD terminal position on the electrical part in question.The device is powered by a voltage of 3.3V volts.It is a part of the family Programmable Logic Devices.It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at -40°C~85°C TA.It is recommended to mount the chip by Surface Mount.FPGAs belonging to the CoolRunner XPLA3 series contain this type of chip.With 100 pins programmed, the chip is ready to use.When using this device, YES is also available.You can find its related parts in the XCR3128XL.3000 gates are used to construct digital circuits.If high efficiency is desired, the supply voltage should be kept at 3.3V.It is recommended that data be stored in EEPROM.In this case, it is mounted by Surface Mount.The pins are 100.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.With a minimal supply voltage of 2.7V, it operates.It is important to make sure that the maximum frequency is less than 95MHz.An elementary building block consists of 8logic elements/cells.

XCR3128XL-10VQG100I Features

100-TQFP package
84 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
100 pins

XCR3128XL-10VQG100I Applications

There are a lot of Xilinx Inc.
XCR3128XL-10VQG100I CPLDs applications.

• Digital systems
• Portable digital devices
• Handheld digital devices
• Battery operated portable devices
• Complex programmable logic devices
• Digital designs
• Field programmable gate
• Address decoding
• D/T registers and latches
• Synchronous or asynchronous mode