ALD2301CPAL Overview

In order to make transportation easier, it is packaged in 8-DIP (0.300, 7.62mm) .A comparator with an output type of CMOS, NMOS, Open-Drain, TTL is being used.We ship the part through Tube .In general, the chip type can be classified as General Purpose .A total of 2 elements can be found in it.A Through Hole mounting type is recommended.A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.There is 180μA current flowing in this comparator.There is a Through Hole on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 18μA .A current supply greater than 18μA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 4pA current into the device.In general, temperatures higher than 70°C are not recommended.Comparator electronics will not be able to function at temperatures below 0°C .A comparator's maximum supply voltage is 12V volts.Using a voltage as low as 3V is possible for this comparator.For the output quality to be maintained, 2 channels work together.

ALD2301CPAL Features

CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA

ALD2301CPAL Applications

There are a lot of Advanced Linear Devices Inc.
ALD2301CPAL linear comparators applications.

• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications