ALD4212PCL Overview

Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tube. Through Hole is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. Circuits based on SPST - NO switching are used to construct these analog switch ics. The multiplexer consists of 4 circuits. This digital multiplexer has 135Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. Users shouldn't supply more than 12V voltage to the switch device. The lowest voltage fed to the electronic component should be 3V. A digital multiplexer may suffer damage if voltage is applied above 1μA. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. It is not recommended to operate the switches in an environment with a temperature higher than 85°C. It is possible to purchase a 16-PDIP package from suppliers.

ALD4212PCL Features

Switch Circuit: SPST - NO

ALD4212PCL Applications

There are a lot of Advanced Linear Devices Inc. ALD4212PCL Analog Switches & Multiplexers ICs applications.

• Sample hold systems
• Power routing
• Sample-and-hold systems
• Remote wireless modules
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Cellular phones
• Public switching systems
• SONET
• New designs requiring multiplexer functions
• Cell phones