ALD7555SAL Overview

It is enclosed in the 8-SOIC (0.154, 3.90mm Width) packaging along with the digital timer. Set the frequency of the timer to 2.5MHz.It is used to pack in Tube case. The mounting type recommended is Surface Mount.The programmable timer can supply a voltage of 2V~10V. The type of chips can be divided into 555 Type, Timer/Oscillator (Single). The operating temperature of this timer clock is 0°C~70°C. To mount this digital timer with Surface Mount. To keep the clock timer's supply current at 50μA. The operating supply voltage is rated at 50μA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 8 pins. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 10V. The number of Timers/Counters on the device is 1.

ALD7555SAL Features

Operate frequency at 2.5MHz
Package / Case: Tube
Mounting Type:Surface Mount
Current - Supply：50μA
Max Operating temperature at 0°C
1 Timers/Counters

ALD7555SAL Applications

There are a lot of Advanced Linear Devices Inc. ALD7555SAL Programmable Timers & Oscillators applications.

• Tamper Detection
• Intruder Detection
• White Goods
• Smart Key
• Battery Powered Systems
• Car Door Handle circuit
• Motor control
• Power-On Reset Timer
• “Heartbeat” Timers
• Intruder Detection