The board's 16-SOIC (0.295, 7.50mm Width) package saves space. LED drivers are designed with 8 outputs.The mounting method is Surface Mount.In this case, the result is a Linear with high efficiency.If the led driver ic is set to -20°C~85°C TA, it will work normally.In this case, the frequency is 20MHz.A termination of 16 is used to operate the LED driver.It is configured with 16 pins as its base.Failures may occur if the voltage supply is below 4.5V.The segment count is 8.There is a mounting of it by Surface Mount.LED drivers have a base part number of A6275.Ideally, the supply voltage should be 5.5V.In this device, the output voltage is 4V volts.It consists of 16 pins.As a result, its characteristics can also be categorized as Display Drivers.With a minimal supply voltage of 4.5V, it reaches the highest efficiency levels.The current that can be supplied to the load is 75.5mA.It is necessary to power systems with a voltage of 5VAs a result, this LED driver has a COMMON-ANODE characteristic.
A6275SLW-T Features
Available in the 16-SOIC (0.295, 7.50mm Width) package Operating temperature of -20°C~85°C TA Frequency of 20MHz Supply voltage of 5V Operating with the supply voltage of 5V COMMON-ANODE
A6275SLW-T Applications
There are a lot of Allegro MicroSystems A6275SLW-T LED Driver ICs applications.
LED Lightings for Industrial Equipment
A- lamps
Portable lighting
White LED Backlight for portable equipment
General lighting
Down lights
Down lighting
Stage Lighting and Signage
Medical surgery lighting
LED backlight driver for LCD displays for Tablets and Note PCs