A8480EEJTR-T Overview

To save space on the board, it has a 10-WFDFN Exposed Pad package. As part of the design of this LED driver, there are 1 outputs that have been used.It is possible to mount the led driver using Surface Mount.With high efficiency, it emerges as a DC DC Regulator.-40°C~85°C TA is the operating temperature and it works fine.There are considerable benefits for Backlight, Camera Flash.As a result, it operates on the basis of frequency 1.2MHz.The operation of this system is supported by 10 terminations.There may be undetermined failures if the voltage supply falls below 2.7V.On the Surface Mount, a device is mounted.LED drivers can be found under the base part number A8480.There is a voltage output of 23V.On this device, there are 10 pins.This value is designed to support a maximum of 9V.When operating the device, 3V volts are assigned to the circuit.Input voltages above or equal to 2.7V provide great convenience.The input voltage should be kept below 9V in order to ensure high stability.

A8480EEJTR-T Features

Available in the 10-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz

A8480EEJTR-T Applications

There are a lot of Allegro MicroSystems A8480EEJTR-T LED Driver ICs applications.

• LED Lightings for Industrial Equipment
• Down lights
• Sports Facility Lighting
• Panel lighting
• Dimmable LED for vehicle interiors
• General lighting
• Flicker-free LED Lighting using R1580N
• Replacement lamps
• Street lighting
• Down lighting