AD620BR-REEL7 Overview

Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. Op amps are Instrumentation types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. 8 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 30mV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~85°C. The buffer amplifier is capable of operating from a supply current of 1.3mA . In total, there are 1 circuits on this buffer amplifier. The op amp ic has 1 channels on it. The temperature should not be lower than -55°C for operational amplifier ics to operate. It is recommended that op amp be used at temperatures below 125°C. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. This electronic part is recommended to be used with an 900μA supply for best performance. Over 4.6V is a recommended supply voltage for buffer ampsConduct linear amplifier under the dual suuply voltage of 18V. It is important that the op amp resistance stays within the range of 10GOhm.

AD620BR-REEL7 Features

Resistance of 10GOhm

AD620BR-REEL7 Applications

There are a lot of Analog Devices Inc. AD620BR-REEL7 Instrumentational OP Amps applications.

• Computer workstations
• Comparator
• Portable media players
• Signal operation
• Voltage regulation circuit
• Band-pass filter
• Ultrasound transducers
• Measurements of Wheatstone bridge
• Precision measurement
• Digital cameras