As a clock IC, it uses the Digi-Reel® package. 16-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. As a result, frequency synthesizers can be found to contain 16 terminations. For this clock generator ic, a voltage of 3V is required. This Clock PLL will be fed by CMOS, TTL as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. Providing a maximum frequency of 400MHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows this electrical component to be easily installed on the panel. For safety reasons, this frequency generator's supply voltage should remain above 2.7V. There are 2.7V~3.3V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at -55°C~125°C. I would like to present to you a frequency synthesizer that is compatible with Clock logic levels. This is an electronic part that can be classified as a Clock/Frequency Synthesizer (RF), Phase Detector in this case. In particular, this clock PLL is designed to be used with microprocessors. ADF4002 is the base part number for finding related electronic parts. There is a 16 pin that is available on the digital clock generator. The maximum supply voltage that clock generator can handle is 3.3V. This time clock generator requires a supply current of 5mA in order to operate properly.
ADF4002SRU-EP-RL7 Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Supply voltage of 3V Operating supply voltage of 3.3V
ADF4002SRU-EP-RL7 Applications
There are a lot of Analog Devices Inc. ADF4002SRU-EP-RL7 Clock Generators applications.