As a clock IC, it is packaged by the Tape & Reel (TR) method. A Clock PLL is included with the 20-WFQFN Exposed Pad, CSP package. This clock generator will sustain a maximum temperature of 260 when reflown. As you can see, it consists of 20 terminations. Basically, this time clock generator needs a voltage of 3V. There is a Clock PLL called CMOS, TTL which is designed to be the input to this clock generator. RF synthesizers based on this clock provide frequencies up to 6.2GHz maximum. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock PLL is capable of receiving a maximum of 3.3V as a supply voltage. Keeping the supply voltage for this frequency synthesizer above 2.7V is recommended for safety reasons. There should be 2.7V~3.3V provided with this RF synthesizer. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. This is a clock generator compatible with Clock logic levels. A Fractional N Synthesizer (RF) is a classification for the electronic part in question. Microprocessor-specific clock PLL with 20 bits. According to the base part number ADF4156, its related parts can be found. PLL is designed with 20 pins. PLL clock can handle a voltage of 5V as its supply voltage. A PLL or Frequency Synthesis Circuits clock generator is essentially what this device is. The output frequency is magnified as high as possible with 1 signal outputs. For the time clock generator to operate properly, 26mA of supply current are required. For this analog clock generator, a maximum supply current of 32mA should be avoided.
ADF4156BCPZ-RL7 Features
Available in the 20-WFQFN Exposed Pad, CSP Supply voltage of 3V Operating supply voltage of 5V
ADF4156BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4156BCPZ-RL7 Clock Generators applications.