ADG1202BRJZ-REEL7 Overview

The electronic part can be shipped overseas conveniently because it is packaged in SOT-23-6. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. In total, there are 6 terminations. There are 6 pins injected into the electronic part body. The analog switch ics are built using SPST - NO switching circuits. Search with ADG1202 if you are looking for analog multiplexer variants. It has an internal resistance of 200Ohm. The functions of 6 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. 5V is the lowest voltage that should be fed to the electronic electronic part. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. In the case of dual power supplies, you should connect at least 5V. There is a voltage range of 12V operating voltages for the electrical part. There are 1 inputs to be operated.

ADG1202BRJZ-REEL7 Features

Switch Circuit: SPST - NO
-3db Bandwidth: 660MHz

ADG1202BRJZ-REEL7 Applications

There are a lot of Analog Devices Inc.
ADG1202BRJZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems