DG406DJ+ Overview

As the electronic part is packed in 28-DIP (0.600, 15.24mm), international shipping is convenient. The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Through Hole position. There is 16:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. 28 terminations have been made so far. By its 16 channels, the electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. This electrical component is included in the 28 series of products. The multiplexer consists of 1 circuits. If you are looking for variants of the digital switch, trying search with DG406. It has an internal resistance of 175Ohm. For functions related to 28 pins, please refer to the datasheets. Multiplexers should not be powered above 30V in normal situations. The digital multiplexer has a low cost Dual, Single supply. A low voltage of 5V should be applied to the electronic component. In order to operate this switch device, it would need a current of 500μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. With dual power supplies, you should attach at least 4.5V. There is a voltage range of 28V operating voltages for the electrical part.

DG406DJ+ Features

16 Channels
500μA Supply Current

DG406DJ+ Applications

There are a lot of Maxim Integrated DG406DJ+ Analog Switches & Multiplexers ICs applications.

• High speed data transmission line cards
• Transmit
• Switching Systems
• Sample-and-hold systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• Relay replacements
• Routers
• Signal routing between systems
• Audio and video routing
• Low-Voltage