The electronic component is convenient to ship overseas because it is packed in a 16-VQFN Exposed Pad, CSP. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. 4:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. 16 terminations have been made so far. High-quality output is provided by the electronic component's 4 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. There is an electrical component included in the 16 series. A SP4T switching circuit is used to build these analog multiplexers. The multiplexer consists of 2 circuits. Try searching with ADG1209 if you're looking for variants. Internally, this switch multiplexer has a resistance of 200Ohm. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 16.5V. The lowest voltage fed to the electronic component should be 5V. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. In the case of dual power supplies, you should connect at least 5V. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. Operating voltages of 12V are compatible with the electrical part. The 8 inputs need to be operated in order to work. 550MHz bandwidths enable data to be transferred.
ADG1209YCPZ-REEL Features
4 Channels Switch Circuit: SP4T Bandwidth: 550MHz
ADG1209YCPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG1209YCPZ-REEL Analog Switches & Multiplexers ICs applications.
Audio signal routing
Cable Telephony – NIU, Set-Top Box, Home Side Box
Existing multiplexer applications (both fault-protected and nonfault-protected)