Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG1211YCPZ-REEL7

  • ADG1211YCPZ-REEL7
  • ADG1211YCPZ-REEL7

ADG1211YCPZ-REEL7

ADG1211YCPZ-REEL7

Analog Devices Inc.

130ns, 115ns SPST - NC 190Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1211 16 Pins 100pA 15V 16-WFQFN Exposed Pad, CSP

SOT-23

ADG1211YCPZ-REEL7 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 16-WFQFN Exposed Pad, CSP
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
ECCN Code EAR99
Resistance 190Ohm
Terminal Finish Matte Tin (Sn)
Subcategory Multiplexer or Switches
Max Power Dissipation 150μW
Technology CMOS
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number ADG1211
Output SEPARATE OUTPUT
Pin Count 16
Qualification Status Not Qualified
Operating Supply Voltage 12V
Number of Channels 1
Interface Parallel
Number of Circuits 1
Max Supply Voltage 16.5V
Min Supply Voltage 5V
Test Frequency 1MHz
Operating Supply Current 220μA
Power Dissipation 150μW
Max Supply Current 380μA
Throw Configuration SPST
Turn On Delay Time 130 ns
Number of Inputs 4
Voltage - Supply, Single/Dual (±) 5V~16.5V ±4.5V~16.5V
Supply Type Dual, Single
Bandwidth 700MHz
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 115 ns
Max Dual Supply Voltage 16.5V
-3db Bandwidth 1GHz
On-State Resistance (Max) 190Ohm
Min Dual Supply Voltage 4.5V
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 75 dB
Current - Leakage (IS(off)) (Max) 100pA
Channel Capacitance (CS(off), CD(off)) 1.1pF 1.2pF
On-state Resistance Match-Nom 5Ohm
Switch Circuit SPST - NC
Switch Time (Ton, Toff) (Max) 130ns, 115ns
Charge Injection -0.3pC
Channel-to-Channel Matching (ΔRon) 2.5 Ω
Crosstalk -90dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Height Seated (Max) 0.9mm
Length 3mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $6.18000 $6.18
500 $6.1182 $3059.1
1000 $6.0564 $6056.4
1500 $5.9946 $8991.9
2000 $5.9328 $11865.6
2500 $5.871 $14677.5
ADG1211YCPZ-REEL7 Product Details

ADG1211YCPZ-REEL7 Overview


Shipping overseas is convenient with the electronic component packed in 16-WFQFN Exposed Pad, CSP. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. A SPST - NC switching circuit is used to build these analog multiplexers. There are 1 circuits in this multiplexer. Try searching with ADG1211 if you're looking for variants. There is 190Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 16.5V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 5V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 220μA current would be sufficient. The analogue multiplexer may be damaged if voltage is greater than 380μA. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 4.5V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. 12V operating voltages are supported by the electronic component. It is possible to operate 4 inputs. A 700MHz-bandwidth can be used for data transfer.

ADG1211YCPZ-REEL7 Features


1 Channels
Switch Circuit: SPST - NC
220μA Supply Current
-3db Bandwidth: 1GHz
Bandwidth: 700MHz


ADG1211YCPZ-REEL7 Applications


There are a lot of Analog Devices Inc.
ADG1211YCPZ-REEL7 Analog Switches & Multiplexers ICs applications.


  • Transmit
  • Low-Voltage
  • Isolation
  • Medical
  • Imaging
  • Ultrasound
  • Audio and video switching
  • Automatic test equipment
  • Precision data acquisition
  • Battery-powered systems

Related Part Number

MAX4668ESE+
Maxim Integrated
MAX4668ESE+
$0 $/piece
SN74LV4053APW
Texas Instruments
SN74LV4053APW
$0 $/piece
DG412FEUE+
Maxim Integrated
DG412FEUE+
$0 $/piece
MAX4702ETE+
Maxim Integrated
MAX4702ETE+
$0 $/piece
ADG5434BCPZ-REEL7
Analog Devices Inc.
ADG5434BCPZ-REEL7
$0 $/piece
FSA3357K8X
ON Semiconductor
FSA3357K8X
$0 $/piece
NX3L1T3157GM,115
NXP USA Inc.
NX3L1T3157GM,115
$0 $/piece
MAX14689AETB+T
Maxim Integrated
MAX14689AETB+T
$0 $/piece
TS5A9411DCKR
Texas Instruments
TS5A9411DCKR
$0 $/piece
MAX368EPN+
Maxim Integrated
MAX368EPN+
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News