ADG1211YRUZ-REEL7 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 1:1. Operational temperature extended around -40°C~125°C TA. 16 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 16 pins. Multiplexers built on a SPST - NC switching circuit are built. It consists of 1 circuits. Try searching for the analog switch ic with ADG1211 if you are looking for variants. As far as internal resistance is concerned, it has 190Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 16.5V voltage to the switch device. An effective Dual, Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 5V. This digital switch can be operated with a current of 220μA. Put voltage above 380μA on the multiplexer to cause damage. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. When using dual power supplies, you should attach at least 4.5V. Operating voltages range from 12V. The 4 inputs need to be operated in order to work. 700MHz-bandwidths can be used to transfer data between multiplexers.

ADG1211YRUZ-REEL7 Features

1 Channels
Switch Circuit: SPST - NC
220μA Supply Current
-3db Bandwidth: 1GHz
Bandwidth: 700MHz

ADG1211YRUZ-REEL7 Applications

There are a lot of Analog Devices Inc.
ADG1211YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• New designs requiring multiplexer functions