ADG5248FBRUZ Overview

The electronic component is convenient to ship overseas because it is packed in a 20-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~125°C TA is the extended operating temperature. In total, there are 20 terminations. By its 8 channels, the electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. 20 pins are injected to the electronic part body. It consists of 1 circuits. Look for analog switch ic variants by searching with ADG5248. In this multiplexer, the internal resistance is 335Ohm. The functions of 20 pins can be found in the datasheets. In normalcircumstances, users should not exceed 44V volts for the multiplexer. There should be 8V voltage fed to the electrical part below 8V. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. For dual power supplies, a voltage of at least 5V should be attached. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER.

ADG5248FBRUZ Features

8 Channels
-3db Bandwidth: 200MHz

ADG5248FBRUZ Applications

There are a lot of Analog Devices Inc. ADG5248FBRUZ Analog Switches & Multiplexers ICs applications.

• Automatic test equipment
• High reliability control systems
• Cable PC
• Video switching
• Avionics test equipment
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Microprocessor controlled systems
• Digital access cross connects
• Communications systems
• MP3 players