Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG1223BRMZ

  • ADG1223BRMZ
  • ADG1223BRMZ

ADG1223BRMZ

ADG1223BRMZ

Analog Devices Inc.

130ns, 105ns SPST - NO/NC 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1223 10 Pins 100pA 15V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

SOT-23

ADG1223BRMZ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Lifecycle Status PRODUCTION (Last Updated: 3 weeks ago)
Mounting Type Surface Mount
Package / Case 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Number of Pins 10
Operating Temperature -40°C~125°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 10
ECCN Code EAR99
Resistance 200Ohm
Terminal Finish Matte Tin (Sn)
Subcategory Multiplexer or Switches
Max Power Dissipation 2.3mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 15V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADG1223
Output SEPARATE OUTPUT
Pin Count 10
Operating Supply Voltage 12V
Number of Channels 1
Interface Parallel
Number of Circuits 2
Max Supply Voltage 16.5V
Min Supply Voltage 5V
Test Frequency 1MHz
Power Dissipation 2.9mW
Max Supply Current 190μA
Turn On Delay Time 170 ns
Voltage - Supply, Single/Dual (±) 5V~16.5V ±5V~16.5V
Supply Type Dual, Single
Bandwidth 960MHz
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 105 ns
Max Dual Supply Voltage 16.5V
On-State Resistance (Max) 200Ohm
Min Dual Supply Voltage 5V
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 75 dB
Current - Leakage (IS(off)) (Max) 100pA
Channel Capacitance (CS(off), CD(off)) 2.2pF 2.2pF
On-state Resistance Match-Nom 2.5Ohm
Switch Circuit SPST - NO/NC
Switch Time (Ton, Toff) (Max) 130ns, 105ns
Charge Injection 0.1pC
Channel-to-Channel Matching (ΔRon) 2.5 Ω
Crosstalk -90dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-off Time-Max 140ns
Drain to Source Resistance 120Ohm
Height 850μm
Length 3mm
Width 3mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $3.925218 $3.925218
10 $3.703036 $37.03036
100 $3.493430 $349.343
500 $3.295689 $1647.8445
1000 $3.109141 $3109.141
ADG1223BRMZ Product Details

ADG1223BRMZ Overview


The electrical component comes in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~125°C TA extended. In total, 10 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. Into the electrical component body are injected 10 pins. On the other hand, analog switches can be constructed using SPST - NO/NC switching circuits. Circuits number 2 make up this analogue multiplexer. Look for analog switch ic variants by searching with ADG1223. A 200Ohm internal resistance characterizes this multiplexer. The datasheets for the 10 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 5V as the lowest voltage for the electrical part. A voltage higher than 190μA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VFor dual power supplies, a voltage of at least 5V should be attached. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. This electrical part is compatible with 12V operating voltages. It is possible to transfer data over a 960MHz-bandwidth. There is 120Ohm Drain to Source resistance on this electronic part.

ADG1223BRMZ Features


1 Channels
Switch Circuit: SPST - NO/NC
Bandwidth: 960MHz
Drain-to-Source resistance: 120Ohm


ADG1223BRMZ Applications


There are a lot of Analog Devices Inc.
ADG1223BRMZ Analog Switches & Multiplexers ICs applications.


  • Audio and video switching
  • Automatic test equipment
  • Precision data acquisition
  • Battery-powered systems
  • Sample-and-hold systems
  • Communication systems
  • Data Acquisition Systems
  • Relay Replacement
  • Battery Powered Systems
  • Existing multiplexer applications (both fault-protected and nonfault-protected)

Related Part Number

NX3L1G66GM,115
NXP USA Inc.
NX3L1G66GM,115
$0 $/piece
ADG409BRZ
Analog Devices Inc.
ADG409BRZ
$0 $/piece
MAX4535EUD+
Maxim Integrated
MAX4535EUD+
$0 $/piece
MAX4568EUK+T
Maxim Integrated
MAX4568EUK+T
$0 $/piece
HI3-0506A-5Z
Renesas Electronics America Inc.
HI3-0506A-5Z
$0 $/piece
74LVC1G53GS,115
Nexperia USA Inc.
74LVC1G53GS,115
$0 $/piece
MAX314LEUE+T
Maxim Integrated
MAX314LEUE+T
$0 $/piece
CD74HCT4051M
Texas Instruments
CD74HCT4051M
$0 $/piece
DG442DY+T
Maxim Integrated
DG442DY+T
$0 $/piece
MAX378EPE+
Maxim Integrated
MAX378EPE+
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News